P a y R a n g e | B l u K e y P r o | U s e r M a n u a l
P a g e
17 | 23
Appendix B: BluKey Pro Firmware Upgrade
PayRange may release firmware updates with new functionality and improvements.
BKPro firmware is upgraded automatically, in the background. Contact PayRange support for
additional information on firmware upgrades.
Appendix C: Splicing Wires
On some machines power has to be taken from machine’s wiring harness or credit wires have to
be spliced to coin switch wiring harness. Use the following procedure to splice wires.
1.
Splicing harness wires directly to machine wires (do this procedure for both
wires)
Insert one of the machine wires
leading into the control board into
the pass through of the splice
Note: Photo shows splice with metal
brace pulled out for clarity.
Do not remove metal brace, but make
sure it is pulled out enough so the wire
can be fully inserted.
Close the 1
st
part of the tab
Note: Photo shows splice with metal
brace pulled out for clarity.
The linked image cannot be displayed. The file may have been moved, renamed, or deleted. Verify that the link points to the correct file and location.
The linked image cannot be displayed. The file may have been moved, renamed, or deleted. Verify that the link points to the correct file and location.
