P a y R a n g e | B l u K e y P r o | U s e r M a n u a l
P a g e
13 | 23
during cycle
for the harness in Manage (see section “Machine
Controller Programming”).
Machine does not
accept coins
1.
Check if machine accepts coins if BluKey Pro harness is
disconnected from the machine’s coin harness (can
disconnect harness from BluKey Pro). If not, replace coin
acceptor and its harness.
2.
Check machine’s wiring (a loose wire in connector pin
could be causing coin sensor/switch disconnects).
3.
For optical coin sensors: Clean coin sensor optics or
replace coin sensor or coin acceptor assembly.
