Pavone Systems DAT11 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 84

background image

Page 38

COM 2 PARAMETERS WHEN PROFINET / ETHERCAT IS PRESENT

En.FbuS.

FIELDBUS ENABLING

Enabling PROFINET / ETHERCAT fieldbus, if OFF error messages concerning FIELDBUS communication

are never displayed:

Values that can be selected:
OFF
ON
Default: OFF

InP.rEG..

INPUT AREA DIMENSION

Input area dimension for fieldbus (value expressed in Bytes).

Values that can be selected:
32, 64, 96, 128
Default: 128

oUt.rEG..

OUTPUT AREA DIMENSION

Output area dimension for fieldbus (value expressed in Bytes).

Values that can be selected:
32, 64, 96, 128
Default: 128

In case of PROFINET fieldbus, the XML configuration file “GSDML-V2.3-HILSCHER-NIC 50-RE PNS 32-

20160122.xml” is provided. The size of the input and output areas set in the PLC (possible selections:

32, 64, 96 or 128 bytes) must correspond to the size of the input and output areas selected in the

instrument (parameters “INP.REG.” and “OUT .REG.“).
The instruments are supplied with the parameter “Profinet Name” not configured and IP address set

at 0.0.0.0.
In case of ETHERCAT fieldbus: the devices will be connected with ring type (according to EtherCAT speci-

fication), refer to the installation manual for the use of INPUT and OUTPUT ports.
4 different XML configuration fileare provided:
“Hilscher NIC 50-RE V2.2 ECS Byte.xml 32” (32 bytes Input Area, 32 bytes of Output area).
“Hilscher NIC 50-RE V2.2 ECS 64 Byte.xml” (64 bytes Input Area, 64 bytes of Output area).
“Hilscher NIC 50-RE V2.2 ECS Byte.xml 96” (96 bytes Input Area, 96 bytes of Output area).
“Hilscher NIC 50-RE V2.2 ECS 128 Byte.xml” (128 bytes Input Area, 128 bytes of Output area).
In the PLC must be imported the file that matches the size of the input and output areas selected in the

instrument (for example, if the instrument is set to InP.rEG.=128 and oUt.rEG.=128, the PLC has to be

imported file “Hilscher NIC 50-RE V2.2 ECS 128 Byte.xml”). It could be import multiple files with differ-

ent size, but in this case you can not run the automatic search function and configuration of the devices

on the network.

«
...
38
39
40
41
42
...
»

Содержание DAT11





















































































Отзывы:

Нет отзывов

Похожие инструкции для DAT11

Бренд: Ramsey Electronics Страницы: 40

Бренд: Berker Страницы: 6

Бренд: MuxLab Страницы: 2

Бренд: Maas Страницы: 72

Бренд: Yaesu Страницы: 13

sigfox RC4 PULSE V3

Бренд: Adeunis RF Страницы: 27

Бренд: Vaisala Страницы: 2

Бренд: MikroTik Страницы: 2

Бренд: V2 Страницы: 20

Бренд: EI Страницы: 41

Бренд: Kanga Products Страницы: 26

Бренд: Icom Страницы: 82

Бренд: HLLY Electronics Страницы: 4

Бренд: HLLY Страницы: 5

CDT-MOD-2000 Series

Бренд: HK Instruments Страницы: 4

Бренд: HK Instruments Страницы: 4

Mid-Size Transmitter 31.320

Бренд: Hubbell Страницы: 2

Бренд: Tait Страницы: 118

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды