Paul thermos 300 DC, Руководство по эксплуатации

Страница: 16 / 72

Status 14.07.09
We reserve the right to make
changes favouring technical
progress.
User Guidance
Automatic Control Unit
thermos 200 / 300 DC
®
WÄRMERÜCKGEWINNUNG
© Paul Wärmerückgewinnung GmbH • August-Horch-Straße 7 • 08141 Reinsdorf • Deutschland
Tel: +49(0)375-303505-0 • Fax: +49(0)375-303505-55 • E-Mail: info@paul-lueftung.de • Internet: www.paul-lueftung.de
4
1.2.2 Menu Settings – Enable 1.0
In this menu, the user can activate or deactivate the modules existing in the given system.
Su/wi bypass:
Controls a flap valve to bypass the heat exchanger.
Required condition: System equipped with a motorised bypass
Heating set to OFF
Heater:
Controls a heating circuit, normally a duct heater.
Required condition: Control system is equipped for heater control.
Heater variants: - Hot water duct heater (pump is controlled)
- Electric duct heater (ohmic heating element is
controlled)
- ISO duct heater (PTC heating element is controlled)
- Static heating elements (pump is controlled)
Night reduction:
Reduction of room temperature setpoint by a given difference at a given time.
Required condition: Control system is equipped for heater control.
Ventilation:
Controls the ventilation fans
Press TA4 and TA5 (up/down arrows) to scroll through the menu items;
Press TA3 to select ON or OFF
Press TA1 to return to the previous menu.
The associated modules or devices are activated or deactivated via the software.
If this function is switched off, the related sensor readings are no longer evaluated.
Press TA1 to return to the menu Settings 1.
The current active functions of the system are displayed in the menu Enable only, not in the basic menu.
Interlocks:
If heater is ON, the su/wi bypass remains closed.
Enable 1.0
←
Su/wi bypass: Off
Air heating: Off
Night reduction: Off
Ventilation: Off
↓ ↑
E/A
TA1
TA2
TA3 TA4 TA5