Paul CLIMOS F 200 Eco, Руководство по эксплуатации

Страница: 26 / 41

26
4. Remove the casing cover
C
and remove the cable for potential equalisation from the flat plug of the casing
cover.
Fig 36: Remove the casing cover
C
from the device
5. Pull the retaining clamps
D
(4x) out of the EPP foam modules in vertical position.
Fig 37: Retaining clamps
D
for form-fit fastening of the EPP foam modules
6. Push each of the fan boxes
F
in the direction of the air duct connections by approx. 3 - 4 mm so that the heat
exchanger box
G
is unlocked out of the tongue-and-groove joint.
D
C