Patton SmartNode 4900 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 76

background image

Patton Electronics Company, Inc.

7622 Rickenbacker Drive

Gaithersburg, MD 20879 USA

Tel: +1 (301) 975-1000

Fax: +1 (301) 869-9293

Support: +1 (301) 975-1007

Web:

www.patton.com

E-mail:

[email protected]

Trademark Statement

The terms

SmartNode

,

SmartWare

, and

SmartView

are trademarks of Patton

Electronics Company. All other trademarks presented in this document are the prop-
erty of their respective owners.

Copyright © 2012, Patton Electronics Company. All rights reserved.

The information in this document is subject to change without notice. Patton Elec-
tronics assumes no liability for errors that may appear in this document.

Important Information

To use virtual private network (VPN) and/or AES/DES/3DES encryption capabilities
with the SmartNode 4900, you may need to purchase additional licenses, hardware,
software, network connection, and/or service. Contact

[email protected]

or

+1 (301) 975-1000

for assistance.

Warranty Information

The software described in this document is furnished under a license and may be used
or copied only in accordance with the terms of such license. For information about the
license, see

Appendix E, "End user license agreement"

on page 70 or go to

www.patton.com

.

Patton Electronics warrants all SmartNode router components to be free from defects,
and will—at our option—repair or replace the product should it fail within one year
from the first date of the shipment.

This warranty is limited to defects in workmanship or materials, and does not cover
customer damage, abuse or unauthorized modification. If the product fails to perform
as warranted, your sole recourse shall be repair or replacement as described above.
Under no condition shall Patton Electronics be liable for any damages incurred by the
use of this product. These damages include, but are not limited to, the following: lost
profits, lost savings and incidental or consequential damages arising from the use of or
inability to use this product. Patton Electronics specifically disclaims all other warran-
ties, expressed or implied, and the installation or use of this product shall be deemed
an acceptance of these terms by the user.

«
1
2
3
4
...
»

Содержание SmartNode 4900













































































Отзывы:

Нет отзывов

Похожие инструкции для SmartNode 4900

Бренд: Panasonic Страницы: 4

Бренд: Dahua Страницы: 6

Бренд: Lanner Страницы: 78

Бренд: Juniper Страницы: 190

Storagelibrary T24

Бренд: Tandberg Data Страницы: 28

Бренд: LogLogic Страницы: 30

Бренд: Mercusys Страницы: 35

Бренд: H3C Страницы: 3

Бренд: Grundig Страницы: 24

18x18 Card Cage

Бренд: WolfPack Страницы: 31

Бренд: Gemtek Systems Страницы: 51

Бренд: RubyTech Страницы: 25

Бренд: Chaparral Страницы: 96

Edge-Core A07-ES4548C

Бренд: Atlantis Land Страницы: 2

DiskStation Series

Бренд: Synology Страницы: 6

Бренд: TRENDnet Страницы: 15

Бренд: netsys Страницы: 243

Бренд: SMC Sierra Monitor Страницы: 43

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды