11
OnSite 2701A/I E1/T1 Ethernet Bridge (NTU) User Manual
About This Guide
General observations
•
Clean the case with a soft slightly moist anti-static cloth
•
Place the unit on a flat surface and ensure free air circulation
•
Avoid exposing the unit to direct sunlight and other heat sources
•
Protect the unit from moisture, vapors, and corrosive liquids
Factory default parameters
The OnSite device has the following factory default parameters:
•
Ethernet IP address: 192.168.200.10/24
•
WAN Connection: PPP Bridged
•
Ethernet connection
•
MDI (LAN connector)
•
T1 configuration. RJ-48C (100-ohm) interface
•
E1 configuration. RJ-48C (120-ohm) and dual-BNC interface (75-ohm)
Typographical conventions used in this document
This section describes the typographical conventions and terms used in this guide.
General conventions
The procedures described in this manual use the following text conventions:
In accordance with the requirements of council directive 2002/
96/EC on Waste of Electrical and Electronic Equipment
(WEEE), ensure that at end-of-life you separate this product
from other waste and scrap and deliver to the WEEE collection
system in your country for recycling.
Table 1. General conventions
Convention
Meaning
Garamond blue type
Indicates a cross-reference hyperlink that points to a figure, graphic, table, or sec-
tion heading. Clicking on the hyperlink jumps you to the reference. When you
have finished reviewing the reference, click on the
Go to Previous View
button
in the Adobe® Acrobat® Reader toolbar to return to your starting point.
Helvetica bold type
Commands and keywords are in
boldface
font.
Helvetica bold-italic type
Parts of commands, which are related to elements already named by the user,
are in
boldface italic
font.
Italicized Helvetica type
Variables for which you supply values are in
italic
font
Helvetica type
Indicates the names of fields or windows.
Garamond bold type
Indicates the names of command buttons that execute an action.
