Remote Access
56
OnSite 2701A/I E1/T1 Ethernet Bridge (NTU) User Manual
7
• System Configuration
Figure 34. Alarm & Alarm Error Log configuration
The Alarm Error Log can be enabled or disabled. The severity level of the Alarm Log can also be configured.
Similarly each alarm can be set for its own severity level.
Remote Access
The OnSite can be accessed via Telnet, known as Remote Access. The length of access over a remote connec-
tion is set on this webpage. If set for zero (0), no user can access the OnSite remotely. However if a user is
authorized for access, then the time is the limit before the remote access session is closed.
Figure 35. Remote Access (Telnet) access limit
Update
To upgrade the OnSite to another software version, select the software image by clicking on the Browse button.
The software is a ‘.tar’ file. (See
.) After selected, the software is downloaded to the OnSite. Wait until
the upload has completed. The best way to monitor when the OnSite reboots is to view the process from the
RS-232 console port.
