WAN Service Configuration
43
OnSite 2701A/I E1/T1 Ethernet Bridge (NTU) User Manual
5
• WAN Services
5.
Click on
Create a new service
in the main window, select
Frame relay bridged
and click on the
Configure
button.
6.
Click along the following path:
Services Configuration > WAN > ‘Edit...’
Then click on
Edit ‘Frame Relay
Channel’
. The configurable parameters are:
•
DLCI
: Consult with your service provider for the DLCI number required.
•
Encapsulation type
: Bridged Ether (Defines the RFC 1490 encapsulation type to be used by the channel.
In some instances you may need to choose another type. Consult your service provider.)
•
RX Max PDU
: 8192 Receive side max PDU, default 8192 (normally not changed from default)
•
TX Max PDU
: 8192 Transmit side max PDU, default 8192(normally not changed from default)
•
Channel segment size.
The channel segment size is used to define fragmentation of the packets based on
the Frame Relay Forum IA FRF.12. If this variable is set to 0 then FRF.12 “Frame Relay Fragmentation” will
be disabled, if set to any other value it will set the fragmentation size used.
•
Port:
Defines the port that should be used to setup the Frame Relay Connection. For routed applications
the port should be set to “frf ”, for bridged applications the port should be set to “fr”.
Click on the
Create
button.
This conclude the central site configuration.
