Error Log
59
OnSite 2701A/I E1/T1 Ethernet Bridge (NTU) User Manual
7
• System Configuration
Error Log
The Error Log webpage shows recent configuration errors and provides for the configuration of the Syslog. (See
.) Two parameters are configurable for the Syslog.
•
Syslog Host: enter the IP address of the Syslog (Default = 0.0.0.0)
•
Syslog Facility: select the type of syslog facility (Default = disabled)
Click on the Update button to activate the selected parameters. Default value is a disabled Syslog.
Figure 41. Error Log and Syslog Settings
SNMP Daemon
For remote management from an SNMP capable management station, the OnSite device’s SNMP Daemon
must be configured. To identify a specific OnSite, configure the Static Variables which the system administra-
tor may use for link identification.
The Community Table has three configurable parameters.
•
Password: this is the password which the remote management station must use to access the OnSite for
reading/writing the SNMP variables.
•
Management IP: the IP address of the management station.
•
Access: select either Write or Read. The management station can be authorized to configure the OnSite by
‘writing’ to the SNMP variables or limited to a read-only function.
To delete an entry, click on the ‘Del’ box and click on the Update button.
