Introduction
57
FS6300 NMS Getting Started Guide
6 • Configuring the 3096RC Card
Introduction
The Patton Model 3096RC is a G.SHDSL TDM Concentrator with 16 G.SHDSL ports. There are several
ways to reach the configuration menu for the 3096RC card:
•
Click on
Network Maps
in the main menu tree, then click on
Chassis.
Right-click on the 3096RC icon.
•
Select the
3096RC
card from the main menu tree, then right-click on the card icon in the main window.
•
Navigate to
Network Database
>
Managed Objects
>
Cards
in the main menu tree, then right-click on the
IP address of the card in the table in the main window.
The best way to reach the configuration menu for a card is to select the card in the main menu tree, then right-
click on the card’s icon in the main window.
3096RC Configuration Menu
The following options are available in the pull-down menu for the 3096RC card:
Figure 39. 3096RC Configuration Menu
•
Card Overview – Shows information for Box Status, Card Info, and Alarm Info
•
Alarm Parameter Configuration – See
“Configuring the Alarm Trap Manager”
on page 29 in
Chapter 3
•
Card Front Panel GUI – See
“Viewing the Front Panel”
on page 58
•
Card System Clocking – See
“Configuring Card System Clocking”
on page 34 in
Chapter 3
•
Card System Configuration – See
“Configuring the Card System”
on page 58
•
Ethernet Overview – See
“Configuring Ethernet Settings”
on page 60
•
Events and Alerts – See
“Viewing Events and Alerts”
on page 61
•
Export Import Configuration – See
“Exporting/Importing the Configuration”
on page 61