manualshive.com logo in svg

Patton electronics 6511RC, Справочное руководство администратора

Поделиться
Скачать
Patton electronics 6511RC Скачать руководство пользователя страница 86

9 • IP Filtering

Model 6511RC Matrix Switch Administrators’ Reference Guide

76

An example of using a filter

•

greaterThan(3) – the destination port in the IP packet must be greater than the source port specified for the 
filter to be applied 

Port (filterIpDestinationPort)

The port number to be compared to the destination port in the IP packet

Protocol (filterIpProtocol)

Specifies the IP Protocol number to use for filtering. Some examples of protocol numbers are 1 for ICMP; 6 for 
TCP; and 17 for UDP. A list of protocol numbers can be found in RFC 1340. A setting of 0 disables process-
ing based on protocol number.

TCP Established (filterIpTcpEstablished)

Specifies whether the filter should match only those packets which indicate in the TCP header flags that the 
connection is established. The following choices are available:

•

anyPackets(0)—Applies the filter to all packets

•

onlyEstablishedConnections(1)—Only applies the filter to established TCP connections

Default for dialin (filterIpDefaultDialin)

This option applies the filter to as a default filter for all dial-in users. If another filter is specified, either in 
RADIUS or in the static user profiles, then all dial-in defaults are disabled and only the specified filters are 
applied. The following choices are available:

•

no(0)

•

applyToDialin(1)

An example of using a filter

All customers are limited to the local mail server (mail.internal.com) and an internal website 
(www.internal.com).

•

The IP address for mail.internal.com is: 192.10.10.1

•

for: www.internal.com is: 192.10.10.2

•

DNS server for name resolution is 192.10.10.1.

The filters needed:

•

ID:1

–

Name: Mail Server

–

Direction: inbound

–

Action: pass

–

Source IP and mask: not set

–

Destination IP: 192.10.10.1 mask: 255.255.255.255

–

Source Port: no compare

Содержание 6511RC











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды