manualshive.com logo in svg

Patton electronics 6511RC, Справочное руководство администратора

Поделиться
Скачать
Patton electronics 6511RC Скачать руководство пользователя страница 84

9 • IP Filtering

Model 6511RC Matrix Switch Administrators’ Reference Guide

74

Modify Filter

Action (filterIpAction)

Specifies the action to take on a packet whether to block or pass the packet. The following options are available:

•

pass(0)—If pass is selected, checking will continue on to other filters until either a match occurs, a block 
occurs, or there are no more filters remaining to check.

Note

If there are any applied PASS filters, then at least one of them must match or 
the packet will be dropped.

•

block(1)—If a filter has block set and the filter matches the block, the packet is discarded and no further 
processing is done.

•

wrap(2)—All packets received on the specified dialup link will be encapsulated in an extra IP header as 
defined in RFC2003. The destination IP address of the wrapper is given by the destination IP setting in the 
filter. The source IP address of the wrapper is the ethernet address of the remote access server. 

All wrap filters are inbound only. 

Note

Block filters take priority, therefore any applied and matching block filters 
will drop the packet. Next, pass filters are examined, if PASS filters have been 
defined, then at least one of them must match or else the packet will be 
dropped. After the block and pass filters are examined, the WRAP filter, if it 
exists, will be applied.

Source IP

Applies the filter action based on the results of the stated comparison to the IP address and subnet mask.

Comparison (filterIpSourceAddressCmp)

•

equal(0)—apply the action of the filter if the Source IP equals the IP address/subnet mask combination 
supplied

•

notEqual(1)—apply the action of the filter if the Source IP does not equal the IP address/subnet mask com-
bination supplied 

Address (filterIpSourceIp)

The IP address to which the filter will compare the source IP address.

Mask (filterIpSourceMask)

The subnet mask the filter will apply to the source IP address to make the comparison.

Note

These fields are ignored unless either the IP address or Mask have been 
entered. Bit positions that are set to 1 will be compared and 0s will be 
ignored. Thus, a setting of 0.0.0. will have the effect of disabling source IP 
address comparison.

Содержание 6511RC











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды