manualshive.com logo in svg

Patton electronics 6511RC, Справочное руководство администратора

Поделиться
Скачать
Patton electronics 6511RC Скачать руководство пользователя страница 74

8 • IP

6511RC Matrix Switch Administrators’ Reference Guide

64

Route Destination window

Add a route:

This portion of the IP Routing Information window is where you can add a new route to the IP Routing Infor-
mation table. Fill in the Destination (genRouteDest), Mask (genRouteMask), and Gateway (genRouteGate-
way) information, then click Define.

Destination (ipRouteDest)

The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple 
routes to a single destination can appear in the table, but access to such multiple entries is dependent on the 
table-access mechanisms defined by the network management protocol in use.

Mask (ipRouteMask)

Indicates the mask to be logical-ANDed with the destination address before being compared to the value in the 
ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value 
of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belongs to a 
Class A, B, or C network, and then using the appropriate mask from 

table 3

 on page 63.

Gateway (genRouteGateway)

Specifies the IP address to which the packets should be forwarded.

Advanced…

Enables a route to be attached to an interface. Packets to a network will be routed to that interface, allowing 
the gateway IP address to be dynamic. Fill in the Destination (genRouteDest), Mask (genRouteMask), and 
Inter-face (genRouteIfIndex) information, then click Define.

Destination (ipRouteDest)

The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple 
routes to a single destination can appear in the table, but access to such multiple entries is dependent on the 
table-access mechanisms defined by the network management protocol in use.

Mask (ipRouteMask)

Indicates the mask to be logical-ANDed with the destination address before being compared to the value in the 
ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value 
of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belongs to a 
Class A, B, or C network, and then using the appropriate mask from 

table 3

 on page 63.

Gateway (genRouteGateway)

Specifies the IP address to which the packets should be forwarded.

Route Destination window

The Route Destination sub-page (see 

figure 34

) displays the next-hop routing parameters for the single desti-

nation address displayed in the page title to display the Route Destination window, on the IP Routing Infor-
mation page, identify the destination address you wish to view then click the address link.

Содержание 6511RC











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды