EN
Translation of original owner’s manual
91
4. Others
Check for fuel leakage and loose fastenings and damage
to major parts, especially handle joints and guide bar
mounting. If any defects are found, make sure to have
them repaired before operating again.
■
Periodical service points
1.
Cylinder fins
Dust clogging between the cylinder fins will cause
overheating of the engine. Periodically check and clean
the cylinder fins after removing the air cleaner and the
cylinder cover. When installing the cylinder cover, make
sure that switch wires and grommets are positioned
correctly in place.
2.
Fuel filter
(a)
Using a wire hook, take out the filter from the filler
port.
(1) Fuel filter
(b)
Disassemble the filter and wash with gasoline, or
replace with a new one if needed.
•
After removing the filter, use a pinch to hold the end
of the suction pipe.
•
When assembling the filter, take care not to allow
filter fibers or dust inside the suction pipe.
3.
Spark plug
Clean the electrodes with a wire brush and reset the gap
to 0.6mm
-
0.7 mm as necessary.
Spark plug type
：
See Specifications
8. Maintenance
IMPORTANT
Содержание BP 41
Страница 2: ......
