EN
Translation of original owner’s manual
78
The saw chain has very sharp edges. Use protective gloves for safety.
Make sure the engine stopped before guide bar and saw chain
adjustments.
A standard saw unit package contains the items as shown
below.
：
(1) Power unit
(2) Saw chain
(3) Guide bar
(4) Guide bar scabbard
(5) Plug wrench
(6) File
(7) Chain tensioner nut
(8) Hole
(9) Chain tensioner screw
Open the box and install the guide bar and the saw chain
on the power unit as follows.
1.
Pull the guard towards the front handle to check that
the chain brake is not on.
2.
Loosen two nuts and remove the clutch cover.
3.
Mount the guide bar to the power unit; while
inserting the chain tensioner nut into the lower hole
of the guide bar. Gear the chain to the sprocket and,
while fitting the saw chain around the guide bar, then
install the clutch cover, and fasten two nuts to finger
tightness.
Pay attention to the correct direction of the saw chain.
(1) Moving direction
4. Installing guide bar and saw chain
WARNING
NOTE
Содержание BP 41
Страница 2: ......
