EN
Translation of original owner’s manual
90
Before cleaning, inspecting or repairing your unit, make sure that engine has stopped and is cool.
Disconnect the spark plug to prevent accidental starting.
Follow the instructions to carry out regular maintenance, pre
-
operating procedures and daily
maintenance routines. Improper maintenance may result in serious damage to the machine.
Keep your chain saw in good working condition always.
■
Maintenance after each use
1.
Air filter
Dust on the air filter surface can be removed by tapping a
corner of the filter against a hard surface. To clean dirt in
the meshes, split the filter into halves and brush in
gasoline. When using compressed air, carefully blow from
the inside.
To assemble
the filter halves, press the rim until it clicks.
2.
Oiling port
Dismount the guide bar and check the oiling port for
clogging.
(1) Oiling port
3. Guide bar
When the guide bar is dismounted, remove sawdust in
the bar groove and the oiling port.
Grease the nose sprocket from the feeding port on the tip
of the bar.
(1) Oiling port
(2) Grease port
(3) Sprocket
8. Maintenance
WARNING
Содержание BP 41
Страница 2: ......
