33 | P a g e
PATON
®
PSI PRO 315 A 400 V DC MIG/MAG TIG/MMA
12. SPECIFICATION DATA
ATTENTION!
If the welding unit is rated for a special power supply
voltage, the specification data of the unit are indicated on the nameplate on the
rear panel of the unit. In this case, the electrical outlet of the power supply
system and the power cable of the welding unit should be selected with
consideration for the actual power supply voltage.
Rated power supply voltage, 50/60 Hz, V
~400 V
Power supply voltage range
320 – 400 V
Efficiency coefficient (at the rated current)
90 %
Welding current control range
15 – 315 A for PSI 315 PRO 400V
Welding current at a load factor of 70 %, for 5
minutes
315 А for PSI 315 PRO 400V
Welding current at a load factor of 100 %, for 5
minutes
260 А for PSI 315 PRO 400V
Maximum consumed power
13,5 kVA dla PSI 315 PRO 400V
Normal operating voltage for the manual arc
welding process
21 … 30 V
Normal operating voltage for the argon arc welding
process
10 … 18 V
Normal operating voltage for the semiautomatic
arc welding process
12 … 30/32 V
13. DELIVERY SET
1.
Welding unit with a power cable 3 m in length
– 1 pcs;
2.
Electrode wire feeding unit with rollers for wire (0.6-0.8 and 1.0-1.2) mm
– 1 pcs;
3.
The welding cable 3 m in length with an
Abicor Binzel DE2300
electrode holder
– 1 pcs;
4.
The welding cable 3 m in length with a
Abicor Binzel MK300
grounding clamp
– 1 pcs;
5.
Gas quick connector
– 1 pcs;
6.
Shoulder-carry belt
– 1 pcs;
7.
Cardboard packaging
„PATON™”
– 1 pcs;
8.
Operation manual of device
– 1 pcs;
14. WARRANTY
The Pilot Plant of Welding Equipment of the E.O Paton Electric Welding Institute
guarantees the
correct operation of the power supply if the costumers provided service conditions, storage and
transportation.
ATTENTION!!!
Warranty commitments are cancelled in case of mechanical
damage.