manualshive.com logo in svg

Patlite NE-24A Series, Полное руководство по эксплуатации

Поделиться
Скачать
Patlite NE-24A Series Скачать руководство пользователя страница 27

– 27 –

TYPE

 NE-IL

Troubleshoot problems that occur by following the instructions in the table below.

No.

Problem

Con

fi

 rmation

Remedy

1

The LED does not light.

Is the processing data correct?

Refer to the instructions in “ 

6

 Using the 

LED and Buzzer ” (P. 16), and resend 

the processing data.

Is the speci

fi

 ed value correct?

Check “ 

6

 Using the LED and Buzzer” 

(P. 16) and set the speci

fi

 ed value.

Has the wiring been connected properly?

Wire the LED again while referring to the 

instructions in “ 

5

 Wiring ” (P. 12).

Is the power source supplying the proper 

voltage and current?

Check whether the connected IO-Link is 

putting out the proper voltage.

2

The color of the LED 

differs from the desired 

color.

Is the processing data correct?

Refer to the instructions in “ 

6

 Using the 

LED and Buzzer ” (P. 16), and resend 

the processing data.

Is the speci

fi

 ed value correct?

Check “ 

6

 Using the LED and Buzzer” 

(P. 16) and set the speci

fi

 ed value.

3

The buzzer does not 

sound.

Is the processing data correct?

Refer to the instructions in “ 

6

 Using the 

LED and Buzzer ” (P. 16), and resend 

the processing data.

Is the speci

fi

 ed value correct?

Check “ 

6

 Using the LED and Buzzer” 

(P. 16) and set the speci

fi

 ed value.

Has the wiring been connected properly?

Wire the LED again while referring to the 

instructions in “ 

5

 Wiring ” (P. 12).

Is the power source supplying the proper 

voltage and current?

Check whether the connected IO-Link is 

putting out the proper voltage.

4

The touch sensor does 

not respond

Has the wiring been connected properly?

Wire the LED again while referring to the 

instructions in “ 

5

 Wiring ” (P. 12).

Is the power source supplying the proper 

voltage and current?

Check whether the connected IO-Link is 

putting out the proper voltage.

Are you touching the sensor too slowly?

The touch sensor may not respond if you 

touch the sensor too slowly.

Is the speci

fi

 ed value correct?

Check “ 

6

 Using the LED and Buzzer” 

(P. 16) and set the speci

fi

 ed value.

Check the product model.

Only products with 

T

 in the model name 

have a touch sensor function.

Содержание NE-24A Series







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды