Patlite NE-24A Series, Полное руководство по эксплуатации

Страница: 26 / 38

– 26 –
TYPE
NE-M1A
Troubleshoot problems that occur by following the instructions in the table below.
No. Problem Con fi rmation Remedy
1 The LED does not light.
Has the wiring been connected properly?
Wire the LED again while referring to the
instructions in “ 5 Wiring ” (P. 12).
Is the power source supplying the proper
voltage and current?
Use the appropriate voltage.
Has the fuse blown? Replace the fuse if it has blown.
Is touch sensor input being used?
Check “ 6 Using the LED and Buzzer”
(P. 16). For products with T in the model
name, the touch sensor input has priority
out of touch sensor input and signal wire
input.
2
The color of the LED
differs from the desired
color.
Has the wiring been connected properly?
Wire the LED again while referring to the
instructions in “ 5 Wiring ” (P. 12).
Is touch sensor input being used?
Check “ 6 Using the LED and Buzzer”
(P. 16). For products with T in the model
name, the touch sensor input has priority
out of touch sensor input and signal wire
input.
3 The LED does not fl ash.
Has the wiring been connected properly?
Wire the LED again while referring to the
instructions in “ 5 Wiring ” (P. 12).
Check the product model.
Products with T in the model name do not
have a fl ash function.
4
The buzzer does not
sound.
Has the wiring been connected properly?
Wire the LED again while referring to the
instructions in “ 5 Wiring ” (P. 12).
Is the power source supplying the proper
voltage and current?
Use the appropriate voltage.
Has the fuse blown? Replace the fuse if it has blown.
Check the product model.
Only products with B in the model name
have a buzzer function.
5
The touch sensor does
not respond
Has the wiring been connected properly?
Wire the LED again while referring to the
instructions in “ 5 Wiring ” (P. 12).
Is the power source supplying the proper
voltage and current?
Use the appropriate voltage.
Has the fuse blown? Replace the fuse if it has blown.
Are you touching the sensor too slowly?
The touch sensor may not respond if you
touch the sensor too slowly.
Check the product model.
Only products with T in the model name
have a touch sensor function.