Patlite LA6-POE Скачать руководство пользователя страница 84

Страница: 84 / 94

Signal Tower LA6-POE Operation Manual

Problem

Cause/Countermeasure

Reference

The buzzer does not sound.

Is the buzzer sound set to "Mute"?

Set the buzzer sound to an audible level.

“6.6 Buzzer Sound Control”, pg.

Is the "Buzzer: No sound" selected in the smart mode setting?

Set up the desired buzzer pattern.

“EDITOR for LA series” help

Is the power properly supplying the correct voltage?

Please check that the supply voltage is at the rated voltage.

Is the electric wiring connected correctly?

Check whether the wiring is connected correctly.

“3.2 Wiring”, pg. 11

The buzzer sound volume

is small.

Is the buzzer volume set to minimum?

Set the buzzer sound to an audible level.

“6.6 Buzzer Sound Control”, pg.

Is the setup data correct?

Check that the contents of the setup data is correct.

“4.4 LED Unit Setup”, pg. 20

“EDITOR for LA series” help

Cannot operate Socket

Communication.

Is the communication port correct?

Check the port number setting.

“4.6 Command Configuration”, pg.

“4.7 Modbus/TCP Setup”, pg. 26

Is the communications protocol correct?

Check the protocol setting.

“4.6 Command Configuration”, pg.

Is the transmitted data correct?

Check the transmitted data.

“5.1 PNS Command”, pg. 32

“5.2 PHN Command”, pg. 44

“5.3 Modbus/TCP”, pg. 46

It does not operate in DHCP

mode.

Check that the environment is connectable with a DHCP

server.

The Signal Tower will not

switch off, even if the

"Clear" switch is pressed.

Is the control method set to the signal wire control method?

Please set it to the command control method.

“4.5 Main Unit Setup”, pg. 24

The LED flashes red in all

tiers immediately after

switching on the power.

The setting data is damaged.

Rewrite the setting data.

“4.4 LED Unit Setup”, pg. 20

The writing of the setting

data failed.

Was the setting data for the LED unit and LAN unit written

wrong?

Make sure the setting data to be written is correct.

The firmware writing has

failed.

Was the firmware for the LED unit and LAN unit written

wrong?

Make sure the firmware to the proper unit is written correctly.

Mirroring does not display.

Is the mirroring destination set up for the signal line control

method?

Please set it to the command control method.

“4.9 Mirroring Setup”, pg. 28

Is the IP address for the mirroring destination set in the

destination of the mirroring setting?

Set the IP address correctly.

“4.9 Mirroring Setup”, pg. 28

Was the LAN cable linked to the product substituted for

another HUB port?

Reboot the HUB.

Was the LED unit setting data read during the mirroring

operation?

Reboot this product.

The adhesive strength of

this rubber sheet becomes

weak.

Is there dirt or oil adhered to the rubber sheet to weaken it?

Remove the bottom plate from the product, remove the dirt

etc., with water, then dry it thoroughly before reuse.

“3.1 How to Install”, pg. 9

Содержание LA6-POE































































































Результаты поиска

Содержание LA6-POE

Отзывы:

Похожие инструкции для LA6-POE

Бренды по названию

Популярные бренды

Patlite LA6-POE, Руководство по эксплуатации

Результаты поиска

Содержание LA6-POE

Отзывы:

Похожие инструкции для LA6-POE

Бренды по названию

Популярные бренды