6
Signal Tower LA6-POE Operation Manual
1.2. For safe application, observe the following:
!
WARNING
To prevent from shock, short-circuits or damage, observe the following:
• Be sure the power is disconnected before replacement (fuse exchange, etc.) or repair.
• Use this product in a properly maintained condition. (Replace or repair if the body, LED unit, etc. are damaged.)
Request the installation and wiring be performed by a professional contractor if construction work is involved. Failure
to comply may result in fire, electric shock or falling from high places may occur.
!
CAUTION
Do not listen to a buzzer at close range. Failure to observe this may lead from irritation to permanent damage to the
ears.
In order to maintain protection of this product against dust and waterproofing performance, be sure to use the head
cover, buzzer unit, USB cover and LAN Bracket in the condition that it was originally attached. ( TN Direct Mount Type)
Do not operate this product with the ‘O’ ring or waterproof packing removed. Waterproof performance will drop and
possibility cause failure. ( TN Direct Mount Type)
By all means, do not apply voltage to the Common wire (COM) or Flashing Common line. Product failure will occur.
When removing covers or packing from the equipment, which is attached to this product, be careful not to snag the
product. Failure to comply may result in damage to the product.
Do not drop, or allow this product to fall. Failure to comply may result in damage to the product.
!
NOTICE
To ensure proper safety while using the signal tower, observe the following:
• Perform periodic pre-maintenance.
• As a precaution against problems occurring, Use this product together with other equipment.
Be sure to discharge any static electricity from the body before handling static sensitive parts of this product.
(To prevent damage from static electricity, touch hands or other body parts to metals or an earth ground to discharge
the body from static charge.)
Use a soft cloth, etc., dampened with water to wipe the main signal tower unit.
(Do not use cleaners containing chemicals such as thinner, alcohol, gasoline or oil.)
To ensure safety when this product is installed onto equipment, observe the following:
• Do not remove parts beyond those designed to be removed from this product.
• Do not modify or disassemble this product.
• Use only the specified replacement parts listed in comprehensive manual.
Contrary to Warnings and Cautions indicated in this document, product failure due to mishandling, disassembly,
modifications or natural disasters, etc. is not covered by any Warranty.
Moreover, avoid any applications outside those indicated in this document.
1.3. Product Features
This product has a new "Smart Mode" function; in addition to the"Signal Tower Mode", which can directly control the LED
and buzzer like a standard signal tower. In the "Smart Mode", various displays can be shown, such as a slow flashing rate,
simulating that of a firefly and a display that can be used as a level meter.
In addition to the signal line input control, since it is compatible with the Power over Ethernet (henceforth, PoE), it can be
operated through a LAN Cable to acquire signal tower status conditions via the network, and control it in the Signal Tower
Mode or Smart Mode. Also, this product can use the mirroring function, in which one signal tower can show the same status
as the other, but in a different location.
Since the Signal Tower is the LA6, the dedicated application software, "EDITOR for LA series" can be used to reflect the
setting data via the network.
* Visit our company's home page and download the latest application software for free.
1.4. Trademarks
Internet Explorer is a trademark or registered trademark of Microsoft Corporation.
Google Chrome is a trademark or registered trademark of Google Inc.
