Pass Laboratories XP-10, Руководство пользователя

Страница: 6 / 18

November 18, 2010 Rev 1.02
6
The Manufacturer Will Not Be Responsible for Any Damages,
Inconvenience or Mental Anguish That May Result From These
Spacetime Perturbations.
There is a much higher probability that when you first plug your new
pre-amp into the wall and listen that you will not be experiencing the
full measure of performance this product is capable of. These are high
bias Class A topology circuits and their performance is largly
temperature dependendt. We expect these circuits to heat up slowly
through normal operation, do not attempt to augment that heating by
any artificial means. Temperature and performance will slowly
stabalize over the first 24 hours of operation and thereafter will be at
their sonic best. Be aware however that if you unplug or otherwise
remove power from the unit that the warm up period starts afresh.
Please give this product at least 24 hours initial warm up time
before attempting any critical listening.
Like virtually all modern digital product, there is no “off” in the
traditional sense. The XP preamps are quite “Green” a typical current
draw for this product is 10 watts; they are designed to be powered up
100% of the time.
SET-UP AND OPERATION
So much for the philosophy, physics and advantages, lets play music.
Please read and understand the operational instructions and safety
issues associated with this product. We go through great effort to
make a soundly engineered, and supurbly performing product of
lasting duribility.