Pass Laboratories XP-10, Руководство пользователя

Страница: 8 / 18

November 18, 2010 Rev 1.02
8
There are a total of five inputs. Two of the five inputs are balanced
XLR only. The other three inputs are single-ended only. There are
two pairs of outputs available with identical gain structure. One pair
Balanced, one pair single-ended.
Balanced inputs and outputs are via XLR connectors. Single-ended
inputs and outputs are via RCA connectors. On the XLR connectors,
pin 1 is grounded, pin 2 is the positive signal, and pin 3 is the negative
signal. Left channel RCA connectors are marked with "L". Right
channel RCA connectors are marked with "R". In a similar fashion
balanced XLR inputs and outputs are marked with "L" for left and "R"
for right channel.
The main outputs are located at the left-hand side (viewed from the
rear) of the rear panel, two male XLR connectors, and two RCA
connectors, "R" (right) and "L" (left). The RCA connector's ground is in
parallel with pin 1 of the XLR outputs and the RCA hot is fed from an
independent summing junction that maximizes the X circuit benefits.
The RCA, single-ended, outputs are buffered from the balanced
outputs. You may use both the single ended and balanced outputs at
the same time. On the XLR, pin 1 is ground, pin 2 is positive, and pin
3 is negative.
Description of Operation
In application the XP-10s front panel controls and alphanumeric
display are quite straight forward, and intuitive. We encourage you to
become familiar with their operation prior to establishing any input
connections with this unit.