Pass Laboratories XP-10, Руководство пользователя

Страница: 9 / 18

November 18, 2010 Rev 1.02
9
Experience indicates that engaging in a few minutes of exploration will
add much to your ultimate enjoyment of this exceptional Pass Labs
product.
The left most button on the front panel is Mute. Pressing this button
toggles between mute on and mute off. Mute on removes signal from
the output of the preamp.
The front panel mode switch cycles the preamplifier display through 2
different levels and off. These two functions are as follows: Bright, Dim
and Off. Using any functions with the display “off” will momentarily
bring the display back up to its dim setting.
The two Select switches (designated by left and right pointing arrows)
then alter the displayed active input, 1 through 5.
Input 5 is unique in that it is linked with the Home Theater (Unity Gain)
function. (The HOME THEATRE FUNCTION is discussed at length
later in this manual.) The two select arrows logically control selections
of the various inputs to the preamplifier.
The theater pass through function bears special attention, this function
is only available as direct access through the hand held remote control.
This function is associated only with input number 5 and has two
positions selected with the “pass thru” button on the remote; those two
positions, on and off. This function is useful in that it allows the
preamplifier to function as a unity buffer (0dB gain at volume step 75)
for use with components that best function with their own volume
controls, such as surround processors.