November 18, 2010 Rev 1.02
2
For your protection please read the following:
Water and moisture:
Electrical devices should not be used near
water (as per example, near a bathtub, washbasin, kitchen sink,
laundry tub, wet basement or swimming pool ). Care should be taken
such that objects do not have the opportunity to fall, and that liquid is
never spilled onto or into the device enclosure through openings.
Power Sources:
An electrical device must be connected to a mains
power source in strict accordance with the supplied product owner’s
manual. Please verify that the AC mains voltage specified in the
product manual matches those requirements indicated on the unit and
the AC voltage provided to your location by the power company.
Grounding:
Adequate precautions should be taken so that the
grounding provisions built into an electrical product are never defeated.
Power Cords:
Pass Laboratories provides a power supply cord that
meets all legislated requirements for the market in which the product
was originally sold. If you choose to substitute an after-market product
we urge you to choose one that is fully safety rated by the necessary
local authority.
Power Cord Protection:
Power supply cords should be routed so that
they are not likely to be walked on, abraded, or pinched by items
placed on or against them, paying particular attention to cords where
they enter plugs or exit from a device. Never under any circumstance
insert a cut or damaged power cord into a mains power socket.
Power and Signal:
Cables should never be connected / disconnected
with equipment powered up. Failure to heed this warning may damage
or destroy equipment.
Ventilation:
Power-amplifiers run hot, but you should be able to place
your hands on them without discomfort. You must allow for this heat in
installation, by providing for free air circulation around the product.
Electronics should not be subjected to sources of excessive radiant
heat. Excessive heat can shorten the life of the product and may cause
the electronics to self-protect and shut down.
Servicing:
To reduce the risk of fire, electrical shock or other injuries,
the user should not attempt to service the device beyond that which is
described in the operating instructions. All other servicing must be
referred to qualified service personnel.
Содержание XP-10
Страница 1: ...November 18 2010 Rev 1 02 1 PASS XP 10 Owner s Manual ...
Страница 17: ...November 18 2010 Rev 1 02 17 ...
