Paso PAW5500-VES Series, Руководство пользователя

Страница: 41 / 52

41
EN
PAW5500-VES
System manual PAW5500-VES Compact systems
set> MESSAGE CONFIG. Setting of emergency messages
The default messages (Alert, Evacuation and warning signal/chime) are stored
in the PAW5500-VES internal fl ash memory. To further customise the system, it
is also possible to load customised WAV fi les from external devices (an SD card
or USB memory stick). To do this, it is necessary to:
- Use the << and >> keys to select the message to be loaded.
- Press ‘ Load new fi le ’ to go and select the fi le in the SD card or on the USB
stick in the specifi c search window.
- Select the fi le by pressing ‘ Select ’ and then confi rming with ‘ OK ’.
The display will show the stages of cancellation of the old contents followed
by recording of the new message, played out at the same time via the
monitor loudspeaker. Upon completion the ‘Message confi guration’ screen
will reappear.
Message attributes:
Evac : the message is considered an evacuation message and therefore has a
higher priority than an alert.
Alert : the message is considered an alert and therefore has a lower priority than
an evacuation message.
Broadcast : this is a general announcement, suppressed in emergency
conditions. It is used associated with a broadcast input with the related priority.
None : The message is not used.
To change the attribute of a message, use the ‘Change’ key.
N.B.: Messages 1 and 2 have fi xed attributes, that is to say EVAC and ALERT
respectively. It is compulsory for the system to have at least these two messages,
which can be called up from local and remote stations. All the messages with the
attributes EVAC or ALERT are subjected to checksum tests and in the event of an
error their failure is signalled.
To return to the CONFIGURATION menu, press Escape .
set> LANGUAGE CONFIG. Selecting the language
The factory-set default language is English. The new PAW5500-VES range
enables other languages, pre-installed and stored in the internal fl ash memory,
to be chosen.
Use the << and >> keys to browse through the available languages. When
the required language is shown, press Save . The new menus will be loaded
immediately and the MUSIC screen page will reappear on the display.
To return to the CONFIGURATION menu, press Escape .