12
PAW5500-VES
EN
PAW5500-VES Compact systems
System manual
For details concerning connection and the colours of the wires, refer to the manual of the B711-G base range
(Paso # 11/636-B).
Fig. 1
Fig. 2
Pin
Base AUDIO OUT
PAW AUX
1
Audio +
+
2
Audio –
–
3
GND
0
4
Precedence OUT
PREC
5
Not connected
6
+VDC
+V
7
8
Serial –
Shield
GND
0
4.2.3 CONNECTION TO OTHER PAW5500 VES UNITS
CPU CIRCUIT
Use CAT. 5e SF/UTP cables for connecting other
PAW5500-VES
units (up to a maximum total of 6 per system) via the
REMOTE LINK A/B
sockets (13). The length of the link between the fi rst card-cage and the last unit must not exceed 1000
metres at most.
4.2.4 CONNECTION OF AUXILIARY INPUT
CPU CIRCUIT
The
AUX
terminals (14) are available for connecting auxiliary sources (e.g. a PABX
or a base for announcements with a precedence contact). In the fi rst case, to which
Fig. 1 refers, it is necessary to fi t a jumper onto connector CN9 in position “P-”. In the
second case, on the other hand, using a pre-amplifi ed station of the B711-G range,
connection between the AUDIO OUT socket of the base and the AUX terminals has
to be made as indicated in Table 1 and the jumper will have to be positioned on “P+”.
NOTE: Selection between modes P- and P+ must be made also via the menu (
AUDIO
SETTING
>
set>AUX, CHIME
, page 27).
Содержание PAW5500-VES Series
Страница 6: ...6 PAW5500 VES EN PAW5500 VES Compact systems System manual 2 3 TYPICAL CONFIGURATION ...
Страница 51: ......