Wireless Optical Dissolved Oxygen Sensor
Set Up the Software
4
013-16057A
•
In PASCO Capstone, select
PASCO Capstone Help
from the
Help
menu,
or press
F1
.
LED Information
The Bluetooth and the Battery Status LEDs operate as follows:
For a wireless Bluetooth connection:
For a micro USB cable connection to a USB
port
:
For a micro USB cable connection to a USB
charger
:
*
Logging
: PASCO wireless sensors can either stream live data to a compatible device or log data (save it to the
sensor’s memory). The data can then be uploaded to the device for display and analysis at a later time. Logging
capability supports long-term or remote data collection while not connected to the device.
Note: The latest versions of SPARKvue and PASCO Capstone support logging. Check the PASCO Web page at
www.pasco.com/software
for the latest software version.
Set Up the Software
SPARKvue Set Up
Connecting the Sensor to a Tablet or a Computer via Bluetooth
•
For SPARKvue, select the
“Sensor Data” icon in the
Welcome Page
.
•
In the
Sensor Data
Configuration
window, look in
the “Connected Devices” list.
Select the correct address that
matches the Device ID XXX-XXX
number found on the sensor.
Select a measurement and then
select one of the “Quick Start
Experiments” Templates.
Bluetooth LED
Status
Battery LED
Status
Red blink
Ready to pair
Red blink
Low power
Green blink
Connected
Yellow blink
Logging
*
Bluetooth LED
Status
Battery LED
Status
OFF
--
Yellow ON
Charging
OFF
--
Green ON
Charged
Yellow blink
Logging
*
Bluetooth LED
Status
Battery LED
Status
Red blink
Ready to pair
Yellow ON
Charging
Green blink
Connected
Green ON
Charged
Yellow blink
Logging
*