manualshive.com logo in svg
background image

PS-3220

 Introduction

3

013-16026A

Initial Step: Charge the Battery

Connect the Cable

: On the back of the 

Wireless Drop Counter, pry open the rubber 
seal that covers the Micro USB port. Use the 
included Micro USB Cable to connect the 
micro USB port on the back of the sensor to a 
USB 

port

 or USB 

charger

 such as the 

PASCO PS-2575 USB Single Port Charger. 
Charging begins automatically. The charger 
circuit inside the sensor turns itself off when 
the unit is fully charged. The battery status LED will shine yellow as the battery is charging, and will shine green 
when the battery is charged. The battery is partially charged at the factory. Initial charging time may be three 
hours or longer depending on the power source and the condition of the battery. 

Using the Sensor

The sensor is designed to work with PASCO data collection software to measure the number of drops that fall 
through the drop window. 

ON/OFF and Sleep Information

Before turning the sensor on, make sure that nothing is blocking the drop window. To turn the sensor on, press and 

hold

 the ON button. When the battery status LED shines red for a moment, release the ON button. Then, the 

Bluetooth status LED will blink. This indicates that the sensor is ready to be “paired” with a device using the data 
collection software. NOTE: The sensor calibrates itself each time that it is turned on and therefore it is important 
that the drop window is unblocked when the sensor is turned on.

To turn the sensor off, press and 

hold

 the ON button for a moment until the battery status LED shines red. Release 

the ON button and the Bluetooth status LED stops blinking. The sensor puts itself to sleep after one hour of 
inactivity if connected, and after several minutes if not connected. 

Data Collection Software

See the PASCO web site at 

www.pasco.com/software

 for help in selecting the right PASCO software and to 

check for the latest versions.

Software Help

In Sparkvue, open the Main Menu and select “Help” for information about collecting, displaying, and analyzing 
data. 

PASCO Capstone

SPARKvue

Mac OS X

Mac OS X

Windows

Windows

iOS 

Android

Chromebook

Device 

ID

Pry open the cover.

Micro USB Port

USB Port Cover 

open position

Содержание PS-3214

















Отзывы: