Parweld XTM254i, Руководство пользователя

Страница: 6 / 20

www.parweld.com
6
3.0 technical
Specifications
The XTM 254i, Is a compact type machines with integrated wire
feed units for use with three phase 400V supply. The machine uses
inverter technology to allow MIG , TIG and MMA welding to be
performed.
Feature XtM254i
Input voltage 400V +/-10%
Hz 50/60
phases 3
Wire drive 4 roll
Current Draw (a) 13.5
rated input
capacitance KVa
8.9
No-load voltage
V
73V
Rated working
voltage V
16-26.5
LIFT Arc welding
current a
40-250
MIG welding current
a
40-250
Fuse Rating
(a)
32
Feed speed m/min 1.3-12.5
4.0 Description of Controls
1. POWER INDICATOR: When the machine is turned on, the
power indicator will be on.
2. ALARM INDICATOR: When the thermal indicator is on, it shows
the machine is overloaded and the internal temperature is too
high. Weld output will turn off automatically but the fan will still
be working. When the internal temperature is decreased, the
overload light will turn off and the machine will be ready to weld
3. OUTPUT INDICATOR: When the indicator is on, it means the
machine output voltage is on.
4. CURRENT DISPLAY INDICATOR: It will be display current
preset, and display real-current when the welder is working.
5. LEFT ADJUST KNOB: Its main function is adjusting welding
current in synergic mode and the wire speed in manual mode.
6. VOLTAGE DISPLAY INDICATOR: It will be display Arc-Force
preset in MMA, and display voltage preset in MIG/MAG, and
display real-voltage when the welder is working.
7. MIDDLE ADJUST KNOB: Its main function is adjusting Arc-
Force in MMA, and adjusting welding voltage in MIG/MAG.
8. PROCESS SELECTOR: Press to toggle between MMA and
MIG welding.
9. 2T 4T OPERATION: in 2T mode press and hold the trigger on
for welding and release at the end of the weld. In 4T operation
press and release to start welding and then press and release
to stop welding.
10. SYNERGIC SELECTOR: Toggles between manual control and
synergic control for the MIG welding process.
11. GAS PURGE BUTTON.
12. MIG/MAG GAS SELECTION BUTTON: Users can select the
gas type (synergic mode), and the indicators at the right side of
the button will show the gas type
13. MIG/MAG ELECTRICAL INDUCTOR ADJUST KNOB: Its main
function is adjusting arc’s dynamics in MIG/MAG.
14. WIRE SIZE SELECTOR: Indicates the selected wire size in
synergic mode.
15. BURN BACK CONTROL : (located inside the wire feed box)
Increasing, allows the wire to be burnt back further to the torch,
decreasing reduces the time and so increases the wire stick out
1
2
3
8
9
10
11
12
6
4
4
5
7
13
14
at the end of the weld.
5.0 Installation
15