81
81
Figure 30. Multifunction Adapter Dimensions
A.3 Safety
Summary
The following general safety precautions must be observed during all phases of operation, service,
and repair of this equipment. Failure to comply with these precautions or with specific warnings
elsewhere in this manual violates safety standards of design, manufacture, and intended use of the
equipment. Parvus assumes no liability for the customer’s failure to comply with these requirements.
The safety precautions listed below represent warnings of certain dangers of which Parvus is aware.
You, as the user of the product, should follow these warnings and all other safety precautions
necessary for the safe operation of the equipment in your operating environment.
Ground the Instrument
To minimize shock hazard, the equipment chassis and enclosure must be connected to an electrical
ground. The equipment is supplied with a three-conductor ac power cable; the power cable must be
plugged into an approved three-contact electrical outlet, with the grounding wire (green) firmly
connected to an electrical ground (safety ground) at the power outlet. The power jack and mating
plug of the power cable meet International Electro technical Commission QEC) safety standards.
