Partner Tech International PT-6900, Руководство по обслуживанию, Страница: 25 / 106

Integrated Peripherals 15
Integrated Peripherals
This option defines the operation of peripheral components on the system's input/output ports.
Figure 2.7 Integrated Peripherals menu
OnChip IDE Device (See “OnChip IDE Device” on page 16.)
Onboard Device (See “Onboard Device” on page 17.)
SuperIO Device (See “SuperIO Device” on page 18.)
Watch Dog Timer Select
Sets the watch dog timer. The default setting is Disabled.
Com 3/4 With Voltage
COM ports can be set to supply both data and power to the peripherals that connect to them. Check if the device you
connect needs power from the COM port or if it has its own power supply. The factory setting for the COM ports is
None.
IMPORTANT
The voltage for the COM ports is set at None at the factory. However, for example
to provide power to an installed customer display, this setting must be set at 12V
for the corresponding COM port. For a 5V device such as a barcode scanner, the
setting should be 5V.
P
hoenix – AwardBIOS CMOS Setup Utility
Integrated Peripherals
`
OnChip IDE Device
[Press Enter]
`
Onboard Device
[Press Enter]
Item Help
`
SuperIO Device
[Press Enter]
Watch Dog Timer Select [Disabled]
Menu Level
`
Com3 With Voltage [None]
Com4 With Voltage [None]
ÇÈÅÆ
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults