Chapter 4 Configuring for Ethernet
MiniCapt Remote Microbial Air Sampler Operations Manual
Page 4-5
Write
Saves the most recent changes.
You must send this command
after setting up the
instrument, or your parameters will be lost when the sensor is de-energized.
Unit Serial Number:
NOTE:
When the programming is complete, record these settings for
future reference.
TCP/IP Settings for the MiniCapt Remote
Date
Software Version
Set By
MAC Address
IP Address
Net Mask Address
Gateway Address
:
Viewing Configuration Settings
Type
sta
(
tus
) and press the
Enter
key to display the MiniCapt Remote’s configuration
settings, software version, and connection status.
If this command does not produce any kind of activity on the display screen:
•
the terminal emulator may be set up incorrectly, or
•
the cable may be improperly connected or faulty
