Particle Measuring Systems HandiLaz, Руководство оператора

Страница: 32 / 48

Page 5-2 HandiLaz Operator’s Manual
Chapter 5: Using Optional Accessories
5 Use the following commands to set switches:
Printout as Switches are being Set
6 Push the “Paper feed” button. The following text will print:
The printer is ready for use.
ON = On-Line Button
OFF = Feed Button
[ DIP SW setting mode]
Dip SW-1
* 1 (OFF) : Input = Serial
2 (ON) : Printing Speed = High
3 (ON) : Auto Loading = ON
4 (OFF) : Auto LF = OFF
5 (ON) : Setting Command = Enable
6 (OFF) : Printing
7 (ON) : Density
8 (ON) : = 100%
Dip SW-2
1 (ON) : Printing Columns = 40
2 (ON) : User Font Back-Up = ON
3 (ON) : Character Select - Normal
4 (ON) : Zero = Normal
5 (ON) : International
6 (ON) : Character
7 (ON) : Set
* 8 (OFF) : = USA
Dip SW-3
1 (ON) : Data Length = 8 bits
2 (ON) : Parity Setting = No
3 (ON) : Parity Condition = Odd
* 4 (OFF) : Busy Control = XON/XOFF
* 5 (OFF) : Baud
6 (ON) : Rate
7 (ON) : Select
8 (ON) : = 9600
Continue?: Push ‘On-Line SW’
Write?: Push ‘Paper feed SW’
DIP SW setting complete!!