Particle Measuring Systems HandiLaz, Руководство оператора

Страница: 28 / 48

Page 4-10 HandiLaz Operator’s Manual
Chapter 4: Basic Operation
To toggle Auto-Increment Location ID after every group measurement
from Yes to No or from No to Yes:
1 Navigate to the Auto-Increment Location ID after every group measurement
screen.
2
Use the or buttons to toggle from Yes to No or No to Yes.
3
Press the button to save your setting and return to the Location Setup
navigation level.
To toggle Auto-Increment from Yes to No or from No to Yes:
1 Navigate to the Auto-Increment screen.
2 Use the or buttons to toggle from Yes to No or No to Yes.
3 Press the button to save your setting and return to the Location Setup
navigation level.
Review Data
This menu causes the results held in internal memory to be displayed. The data
is scrolled into view by using the
keys.
For details of a specific data set, press .
Comms. Setup
This menu sets up the Baud Rate of the serial interface, which is necessary for
the printing of results and communication to PCs, etc.
•
Printer Enable (Yes/No)
•
Baud Rate (1200, or 2400, or 4800, or 9600)
Download to PC
This menu enables the results held in internal memory to be downloaded to a
PC, under ‘COUNTWIN’.
NOTE:
The Baud Rate must be set to 9600 under the Comms Setup menu.
NOTE: If you are unable to download to a PC, ensure that both the PC and the
HandiLaz baud rate is set to 9600.