Particle Measuring Systems HandiLaz, Руководство оператора

Страница: 23 / 48

Measure
Page
4-5
The operating cycle is repeated for one less than the number of samples
specified.
There are three “Measure” screens:
•
Sampling/Cycle progress
•
Active Measurement
•
Sample Group Summary.
Sampling Cycle Progress Screens
Sampling progress screens are displayed before active measurement starts and
between periods of active measurement in the sample group.
If there is a programmed delay or a purge time, this will be shown. Otherwise,
the active measurement screens will be displayed immediately.
Active Measurement Screens
There are four “Active Measurement” screens:
•
Count1
•
Count2
•
Sensors
•
Status
They are selected by pressing the and keys. The entry screen is the
Count1 screen. All four screen show a countdown of sample time remaining
which is displayed in the lower left corner.
To discontinue sampling:
press and return to the Main Menu.
The upper three lines of the two count screens (Count1 and Count2) show the
particle counts in three classifications, and the count units are shown in the
lowest line.