Parrot Uncle BBCF344, Инструкция по использованию и уходу

Страница: 6 / 26

3. Ceiling Fan Assembly
(Continued)
LIGHT KIT ADAPTER
TURN ADAPTER CLOCKWISE
RETIGHTEN THE SCREWS WITH
LOCKWASHER IN THE LIGHT KIT ADAPTER
KEY HOLE SLOTS (2)
REINSTALL ONE #6-32 x 3/8" PAN
HEAD SCREW WITH LOCKWASHER
Figure 3
3.3
Place the 2-pin Motor Assembly Connector through the
Large Center Hole of the Light Kit Adapter (Figure 3).
NOTE: Position the 2-pin Motor Assembly
Connector through the Light Kit Adapter Center
Hole, making sure that the Light Kit Adapter does
not pinch the wires.
Position the Light Kit Adapter Key Hole Slots onto the
Two Loosened Screw Heads.
Rotate the Light Kit Adapter Clockwise to Engage the
Two Screws.
NOTE: Verify that the serrated washers are not
trapped between the Light Kit Adapter and the
Motor Assembly Hub.
Reinstall the previously removed #6-32 x 3/8” Pan Head
Screw with Lockwasher (Figure 3).
Retighten all Three #6-32 x 3/8” Pan Head Screws with
Lockwashers to securely attach the Light Kit Housing
Assembly to the Motor Assembly Hub (Figure 3).
A spare #6-32 x 3/8” Pan Head Screw with Lockwasher
is in the hardware bag, if needed.
6
PHILLIPS HEAD SET SCREW
(LOOSENED)
HANGER BALL
4.5" DOWNROD
PIN
GREEN GROUND WIRE
Figure 4
3.4
Remove the Hanger Ball by loosening the Phillips Head
Set Screw in the Hanger Ball until the Ball falls freely
down the 4.5” Downrod (Figure 4).
Remove the Pin from the 4.5” Downrod, then remove the
Hanger Ball (Figure 4).
Retain the Pin and Hanger Ball for reinstallation in
Step 3.11.
NOTE: Do not loosen the screw that attaches the
green ground wire to the hanger ball.
3.5
Separate, untwist and unkink the Five 80” Motor Wires.
Route the Five 80” Motor Wires through the 4.5”
Downrod (Figure 5).
4.5" DOWNROD
80" FAN MOTOR
WIRES (5)
Figure 5