Parrot Uncle BBCF344, Инструкция по использованию и уходу

Страница: 12 / 26

If you feel that you do not have enough electrical
wiring knowledge or experience, have your fan
installed by a licensed electrician.
5.1
Position the Supply Wires to the left side of the Outlet
Box (Figure 16); position the Fan Wires to the right
side.
Partially insert the Remote Control Receiver (flat side
up) until one end rests on the Hanger Ball as shown in
Figure 16.
12
5. How to Wire Your Ceiling Fan
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product
by Parrot Uncle.
WARNING
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box or circuit breaker panel before
wiring. All wiring must be in accordance with National
and Local codes and the ceiling fan must be properly
grounded as a precaution against possible electrical
shock.
WARNING
!
RECEIVER GREEN/YELLOW
GROUNDING WIRE
SUPPLY GROUNDING
CONDUCTOR
HANGER BALL GREEN
GROUNDING WIRE
HANGER BRACKET
GREEN GROUNDING
WIRE
Figure 17
REMOTE
CONTROL
RECEIVER
HANGER
BALL
Figure 16
5.2
Connect the Hanger Ball Green Ground Wire, the
Hanger Bracket Green Ground Wire, and the Remote
Control Receiver Green/Yellow Ground Wire to the
Supply Ground Conductor (this may be a bare wire or
wire with green colored insulation).
Securely connect Wires with a 12 ga. Wire Connector
(supplied in parts bag) (Figure 17).
NOTE: Make all Wiring Connections using
Wire Connectors (supplied). Make sure that all
Connections are tight, including Ground, and that
no bare wire is visible at the Wire Connectors,
except for the Ground Wire.
To reduce the risk of electrical shock, disconnect the
electrical supply circuit before installing the fan or
receiver.
CAUTION
!
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box or circuit breaker
panel before wiring.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
WARNING
!
GROUND WIRE
GROUND
GROUND
GROUND WIRE