Parrot Uncle BBCF344, Инструкция по использованию и уходу

Страница: 16 / 26

16
RECEIVER
ANTENNA
WIRE
OUTLET BOX
Figure 25
5.10
After Connections have been made, turn Wires and
Connectors upward and carefully push them into the
Outlet Box (Figure 25).
Position the Antenna Wire on top of the Receiver. Slide
the Receiver completely onto the Hanger Ball, nestled
in the Hanger Bracket (Figure 25).
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until blades are in place. Noise and fan
damage could result.
WARNING
!
5. How to Wire Your Ceiling Fan
(Continued)
GND
STANDARD WALL
CONTROL
BLACK
BLACK
WHITE
RED
RED
GREY
HANGER BALL
GREEN WIRE (GROUND) FROM
HANGER BALL
TWO-CONDUCTOR CABLE
(WITH GROUND)
BLACK (HOT)
WHITE
SUPPLY
GROUND
TO
120-VOLT
SUPPLY
WHITE
BLUE
GREEN WIRE (GROUND) FROM
HANGER BRACKET
HANGER BRACKET
GREEN/YELLOW
GROUND
ANTENNA
RECEIVER
GREY
BLUE
YELLOW
WHITE
WHITE
Figure 26
5.11
Wiring Schematic for reference (Figure 26).