Parrot Uncle BBCF344 Скачать руководство пользователя

Страница: 2 / 26

Table of Contents

Safety Instructions

TO REDUCE THE RISK OF FIRE, ELECTRICAL

SHOCK, OR INJURY TO PERSONS, OBSERVE THE

FOLLOWING:
a. Use this unit only in a manner intended by the

manufacturer. If you have questions, contact the

manufacturer.

b. Before servicing or cleaning unit, switch power

off at service panel and lock service panel

disconnecting means to prevent power from

being switched on accidentally. When the service

disconnecting means cannot be locked, securely

fasten a warning device, such as a tag, to the

service panel.

WARNING

To reduce the risk of electrical shock, this fan must

be installed with an isolating wall control/switch.
To reduce the risk of fire or electrical shock, this fan

should only be used with fan speed control, Model No.

RH790NR200, manufactured by Rhine Electric Co., Ltd.
This product is designed to use only those parts

supplied with this product and/or any accessories

designated specifically for use with this product.

To reduce the risk of personal injury, do not bend

the blade flange when installing the blade flanges,

balancing the blades or cleaning the fan. Do not

insert foreign objects in between rotating fan blades.
Chemical Burn Hazard. Keep batteries away from

children. Always completely secure the battery

compartment. If the battery compartment does not

close securely, stop using the product, remove the

batteries, and keep it away from children. This

remote contains a lithium button/coin cell battery. If

a new or used lithium button/coin cell battery is

swallowed or enters the body, it can cause severe

internal burns and can lead to death in as little as 2

hours. If you think batteries might have been

swallowed or placed inside any part of the body,

seek immediate medical attention. Dispose of cell

batteries properly and keep away from children.

Even used cell batteries may cause injury.

WARNING

Additional Safety Instructions for Installation

1. To avoid possible shock, be sure electricity is turned

off at the main fuse box or circuit breaker panel before

wiring, and do not operate fan without blades.

2. All wiring must be in accordance with the National

Electrical Code “ANSI/NFPA 70-2017” and Local

Electrical Codes. Use the National Electrical Code

if Local Codes do not exist. The ceiling fan must be

grounded as a precaution against possible electrical

shock. Electrical installation should be made or

approved by a licensed electrician.

3. The outlet box and joist must be securely mounted

and capable of reliably supporting at least 50 pounds.

Use only U.L. outlet boxes listed as “Acceptable for

Fan Support of 22.7kg. (50 lbs.) or less”, and use the

mounting screws provided with the outlet box. Most

outlet boxes commonly used for support of light fixtures

are not acceptable for fan support and may need to be

replaced. Consult a qualified electrician if in doubt.

4. The downrod furnished with the fan provides the

minimum recommended floor to fan blade clearance

for an 8 foot ceiling.

5. Follow the recommended instructions for the proper

method of wiring your ceiling fan. If you do not know

enough about electrical wiring, have your fan installed

by a licensed electrician.

NOTE: This fan is suitable for use with solid-state speed

controls.
NOTE: All set screws must be checked and re-tightened

where necessary before installation.

1. Read your owner’s manual carefully and keep it for

future reference.

2. Be careful of the fan and blades when cleaning,

painting, or working near the fan. Always turn off the

power to the ceiling fan before servicing.

3. Do not put anything into the fan blades while they are

turning.

READ AND SAVE THESE INSTRUCTIONS

Section

Page

Safety Instructions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1. Unpacking Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4
2. Electrical Requirements   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. Ceiling Fan Assembly   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9
4. How to Hang Your Ceiling Fan . . . . . . . . . . . . . . . . . . . . 10-11
5. How to Wire Your Ceiling Fan   . . . . . . . . . . . . . . . . . . . . .12-16

7. Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

6. LED Light Fixture Installation . . . . . . . . . . . . . . . . . . . . .

8. Remote Control Procedures . . . . . . . . . . . . . . . . . . . . . 20-23

17-18

Section

Page

9. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Energy Efficient Use of Ceiling Fans . . . . . . . . . . . . . . . . . . 24

To reduce the risk of injury, install the fan so that the

blades are at least 7 ft. (2.1m) above the floor.

CAUTION

11.