Parmco HX-2-9NF-CER-T, Инструкция по установке и эксплуатации

Страница: 20 / 22

17
Inserng and xing the hob
Before inserng the hob into the work surface, place the adhesive seal around the underside edge
of the hob. It is important to x the seal evenly without gaps, to prevent liquids from seeping
underneath the hob.
1. Place the gasket around the bo<om edge of the hob.
2. Place the hob in the work surface cutout, so the hob is siJng rmly on the surface.
3. Secure the hob to the underside of the work surface using the xing brackets
supplied.
Screw one end of the bracket to the holes on the underside of the hob.
Adjust the posion of the brackets to suit the thickness of the work surface.
Secure the other end of the bracket to the underside of the work surface, in order to
secure the hob into posion.
Cauons
The hob must be installed by qualied personnel. Never conduct the operaon by
yourself.
The hob shall not be mounted to cooling equipment, dishwashers and rotary dryers.
The wall and induced heang zone above the work surface shall withstand heat.
To avoid any damage, the benchtop and adhesive must be resistant to heat.
A steam cleaner is not to be used for cleaning the product.
1 worktop
2
1 3
4
5
2 screw
3 bracket
4 hob
5 hob seal
a
Worktop
Fixing bracket
Screw
Heat outlet