Parmco HX-2-9NF-CER-T, Инструкция по установке и эксплуатации

Страница: 18 / 22

15
Installaon
Selecon of installaon equipment
x
Cut out the work surface according to the sizes shown in the drawing.
x
For the purpose of installaon and use, a minimum of 50mm space shall be preserved
around the hole.
x
Be sure the thickness of the work surface is at least 40-50mm. Please select
heat-resistant work surface material to avoid larger deformaon caused by the heat
radiaon from the hotplate.
x
When installing the hob over drawers, a board must be installed 10mm underneath the
hob. The board must be made of suitable heat resistant materials.
A B C D E F
830mm
490mm 50mm min 50mm min 50mm min 50mm min
Make sure the hob is well venlated and the air inlet and outlet are not blocked.
Dear Installer:
Please ax data label provided on the adjacent cupboard near
the appliance for future reference. Thank you.