Parmco HX-2-9NF-CER-T, Инструкция по установке и эксплуатации

Страница: 15 / 22

12
Care and Cleaning
What? How? Important!
=veryday soiling
on glass
(ngerprints,
marks, stains le
by food or
non-sugary
spillovers on the
glass) 1. Switch o the power to
the cooktop at the wall.
2. Apply a non-abrasive
ceramic cleaner while
the glass is s warm
(but not hot!), or simply
wipe clean with a so
cloth and lukewarm
water.
3. Rinse and wipe dry with
a so clean cloth or
paper towel.
4. 4. Switch the power to
the cooktop back on.
When the power to the cooktop
is switched o, there will be no
‘hot surface’ indicaon but the
cooking zone may s be hot!
Take extreme care.
Heavy-duty scourers, some nylon
scourers and harsh/abrasive
cleaning agents may scratch the
glass. Always read the label to
check if the cleaner or scourer is
suitable.
Never leave cleaning residue on
the cooktop: the glass may
become stained.
Boil-overs, melts,
and hot sugary
spills on
the glass
Remove these immediately
with a scraper suitable for
ceramic glass cooktop, being
careful of hot cooking zone
surfaces.
1.
Switch o the power to
the cooktop at the wall.
2. Hold the blade or utensil
at a 30° angle and scrape
the soiling or spill to a
cool area of the cooktop.
3. Clean the soiling or spill
up with a dish cloth or
paper towel.
4. Follow steps 2 to 4 for
‘everyday soiling on
glass’ above.
Remove stains leby melts and
sugary food or spillovers as soon
as possible. If lecool on the
glass, they may be di]ult to
remove or even damage the glass
surface.
Cut hazard: The scraper blade is
razor-sharp.
Use with extreme care and always
store safely and out of reach of
children.
Spillovers on the
knob controls 1. Switch o the power to
the cooktop at the wall.
2. Soak up the spill
3. Wipe around the knob
control area with a clean
damp sponge or cloth.
(Remove the knob if
required).
4. Wipe the area
completely dry with a
socloth or paper
towel.
5. 5. Switch the power to
the cooktop back on.
If you remove the knob, ensure
no Buid has moved past the rubber
seal around the knob sha.
Also check that the rubber seal is
intact.