Parkside PMSG 200 A1, Инструкции по эксплуатации и безопасности

Страница: 74 / 118

73 GB/MT
– Wear gloves.
– Open windows to guarantee
air supply.
– Wear protective goggles.
„
Gauntlet gloves made of a
suitable material (leather) must
be worn on both hands. They
must be in perfect condition.
A suitable apron must be worn
to protect clothing from flying
sparks and burns. When specific
work, e.g. overhead welding, is
required, a protective suit must
be worn and, if necessary, even
head protection.
z
Protection against rays
and burns
„
Warn of the danger to the eyes
by hanging up a sign saying
“Caution! Do not look into
flames!”. The workplaces must
be shielded so that the persons
in the vicinity are protected.
Unauthorised persons must be
kept away from welding work.
„
The walls in the immediate
vicinity of fixed workplaces
should neither be bright
coloured or shiny. Windows
up to head height must be
protected to prevent rays
from penetrating or reflecting
through them, e.g. by using
suitable paint.
z
EMC Device
Classification
As per the standard IEC 60974-
10, this welding device is a
Class A welding device. The
device complies with the cor-
responding requirements for
industrial and domestic use.
In residential areas, it can be
connected to the public low-volt-
age supply network. Even if the
multi-welder complies with the
emission limit values of the stand-
ard, arc welding devices can still
result in electromagnetic interfer-
ences in sensitive systems and
devices. The operator is respon-
sible for malfunctions that occur
through the arc while welding
and must take suitable protective
measures. In doing so, the opera-
tor must consider the following:
– network, control, signal and
telecommunication lines
– computers and other
microprocessor-controlled
devices
– TVs, radios and other playback
devices
– electronic and electrical safety
equipment
Safety instructions