Parkside PMSG 200 A1, Инструкции по эксплуатации и безопасности

Страница: 65 / 118

64 GB/MT
It is imperative to adhere to the applica-
ble accident prevention regulations.
The device must not be used:
„
in insufficiently ventilated rooms,
„
in explosive environments,
„
to defrost pipes,
„
in the vicinity of people with cardiac
pacemakers and
„
in close proximity to easily
flammable materials.
Residual risk
Even if you operate the device as
intended, there will be residual risks.
The following dangers may occur in
connection with the build and design
of this multi-welder:
„
Eye injuries due to glare,
„
Touching hot parts of the device or
workpiece (burn injury),
„
In case of improper protection risk of
accident and fire through sparks and
slag particles,
„
Harmful emissions from smoke and
gases if there is a lack of air or
if closed rooms are insufficiently
extracted.
Reduce the residual risk by carefully
using the device as intended and
observing all instruction.
z
Package contents
1 Multi-welder PMSG 200 A1
1 1.0 welding nozzle (pre-fitted,
only for solid aluminium wire)
labelling: 1.0 A
4 Welding nozzles for flux-cored
wire (1x 0.6 mm; 1x 0.8 mm;
1x 0.9 mm; 1x 1.0 mm) labelling
in accordance with the diameter:
0.6; 0.8; 0.9; 1.0
1 Chipping hammer with wire brush
1 Solid aluminium wire 200 g
(pre-fitted, 1.0 mm Ø, type:
ER5356
1 Welding mask
1 MMA electrode holder
1 Operating instructions
1 Ground terminal with cable
1 MIG torch with welding cable
1 Flux-cored wire 200 g 1.0 mm Ø,
Type: E71T-GS
5 Rod electrodes (2 x 1.6 mm;
2 x 2.0 mm; 1 x 2.5 mm)
z
Parts description
1
Cover of the wire feed unit
2
Handle
3
Mains plug
4
Earth cable with earth terminal
5
Main switch ON/OFF
(incl. power indicator lamp)
6
Rotary switch for setting the welding
current
7
Torch nozzle
8
Torch
9
Torch button
10
Cable assembly with direct
connection
11
Welding nozzle (0.6 mm)
12
Welding nozzle (0.8 mm)
13
Welding nozzle (0.9 mm)
14
Welding nozzle (1.0 mm)
15
Solid welding wire spool (aluminium)
Ø 1 mm / 200 g (pre-fitted)
16
Flux-cored welding wire spool (steel)
Ø 1 mm / 200 g
17
Chipping hammer with wire brush
18
Feed roll
19
Shield body
20
Dark welding lens
21
Handle
22
Welding mask after fitting
23
Mounting clip
Introduction