Parkside PISG 80 A3, Перевод оригинальной инструкции по эксплуатации и безопасности

Страница: 12 / 40

12 GB/IE/NI
and injure the skin. Wear a hat
and safety goggles. Wear hear-
ing protection and a closed,
high shirt collar. Wear welding
helmets and proper filter sizes.
Wear full personal protection.
Danger due to
electromagneticfields:
Welding current produces electro-
magnetic fields. Do not use along
with medical implants. Never
wrap the welding cables around
the body. Consolidate welding
cables.
z
Safety notices specific to
the welding shield
„
Using a hot light source (e.g.
lighter) always check the weld-
ing shield is working properly
before starting to weld.
„
Welding splashes can damage
the glass shield. Replace dam-
aged or scratched glass shields
immediately.
„
Promptly replace damaged or
heavily soiled / splashed com-
ponents.
„
The equipment may only be
operated by persons who have
turned 16.
„
Familiarise yourself with the
safety instructions for welding.
Also refer to the safety instruc-
tions of your welding equip-
ment.
„
Always use the welding shield
when welding. Failure to use
the shield may result in serious
injuries to the retina.
„
Always wear protective clothing
when welding.
„
Never use the welding shield
without protective glass, as the
optics can otherwise be dam-
aged.
„
Replace the protective glass ear-
ly to ensure good visibility and
fatigue-proof working.
z
Tight and moist spaces
„
When working in tight, moist
or hot spaces, use insulating
pads and intermediate layers
in addition to gauntlet gloves
made from leather or other
insulating materials to insulate
the body from earth.
„
When using welding equip-
ment in electrically dangerous
conditions, e.g. in tight spaces
from conductive walls (kettles,
pipes, etc.), in wet spaces
(soaking of work clothes), the
output voltages of the welding
equipment may not be higher
than 48 Volts (rms value) in
Safety instructions