Parkside PDLA 6.3 A1, Перевод оригинальной инструкции

Страница: 19 / 77

PDLA 6.3 A1 GB
│
IE
│
15 ■
Hazards caused by accessories
■ Disconnect the pressing machine from the power
supply before replacing the machine tool or
accessories.
■ Only use accessories and consumables of the
sizes and types recommended by the machine
manufacturer for pressing; do not use other
types or sizes of accessories and consumables.
Hazards in the workplace
■ Slipping, tripping and falling are the main
causes of injuries in the workplace. Look out
for surfaces which could have become slippery
through use of the machine, and also any trip-
ping hazards caused by air or hydraulic hoses.
■ Proceed with caution in unknown surroundings.
Hidden hazards caused by power or other
supply lines may be present.
■ This pressing machine is not intended for use
in explosive atmospheres and is not insulated
against contact with electrical power sources;
■ Do not operate the machine in the vicinity of
electric mains, gas pipelines, etc. which could
pose a hazard if damaged by the machine.
Hazards caused by dust and vapours
■ The exhaust air should be routed so that the
raising of dust in already dusty environments is
kept to a minimum.
Hazards caused by noise
■ Excessive noise levels in conjunction with insuf-
ficient hearing protection may lead to perma-
nent hearing damage, hearing loss and other
problems, such as tinnitus (ringing, buzzing,
whistling or humming in your ears). It is essential
that a risk assessment is carried out with respect
to these risks and that appropriate regulatory
mechanisms are implemented.
■ Suitable regulatory mechanisms include
measures such as the use of insulation materials
to avoid ringing noise occurring on the work-
pieces.
■ Use ear muffs as per the instructions provided
by your employer or as required by health and
safety regulations.
■ The pressing machine must be operated and
maintained in accordance with the recommen-
dations contained in this manual in order to
avoid an unnecessary increase in the noise
level.
■ Consumables/machine tools should be selected,
maintained and replaced in accordance with
the recommendations in this guide in order to
avoid unnecessary increase of the noise levels.
■ If the machine is equipped with a silencer,
always ensure that it is fitted and that it is opera-
tional while the machine is in operation.
Hazards caused by vibrations
■ Vibrations can damage the nerves and cause
malfunctions to the blood circulation in the
hands and arms.
■ When working in a cold environment, wear
warm clothing and keep your hands warm and
dry.
■ If you notice numbness, tingling or pain in your
fingers or hands, or if the skin on your fingers or
hands turns white, stop using the machine and
inform your employer. You should also consult
an appropriately qualified physician.