9
GB
if you are not going to use the product for a
longer period of time�
Never combine different types of
rechargeable batteries or batteries with
different charge statuses�
z
Risk of leakage from
rechargeable batteries
Avoid exposing rechargeable batteries to
extreme conditions and temperatures, e�g�
radiators or direct sunlight�
Avoid contact with skin, eyes and mucous
membranes! In the event of skin contact
with battery acid, rinse the affected area
immediately with plenty of clean water and
seek medical advice immediately!
WEAR PROTECTIVE GLOVES!
Leaking or damaged rechargeable
batteries can cause chemical burns
if they come into contact with skin�
Therefore, wear suitable protective gloves in
such cases�
In the event that of battery leaks, remove
battery from the product immediately to
avoid damage�
z
Assembly and installation
Please note:
Take the product out of its
packaging and remove all packing material�
Check that all package contents are
present�
Check if the product or individual parts are
damaged� Should you detect damage, do
not use the product� Please contact the
retailer via the service address indicated�
The product can be attached to a magnetic
surface via the magnet
7
(see Fig� C)�
Make sure you protect the surface if it is of a
type that marks easily� Make sure that the
surface is flat and level to ensure the light is
firmly attached. Alternatively, the cordless
work lamp can also be attached by means
of the hook
8
(see Fig� C)�
z
Charging the battery
If the lamp is on, switch it off by pressing
the ON/OFF button
4
�
Place the USB charging holder
9
(see Fig�
D) on a flat, level surface, making sure to
protect the surface if it is of a type that
marks easily�
Place the cordless work lamp
1
in the USB
charging holder supplied
9
(see Fig� D)�
Now connect the USB charging cable
12
to the micro-USB port
11
on the USB
charging holder
9
and connect the other
end of the cable to a standard SELV USB
interface�
The battery will then start charging� The
battery charge level of the cordless work
lamp
1
is indicated by the blue flashing
light of the three-level charge status
indicator
5
(see Fig� B)�
Level one
= approx� 35 %,
Level two
= approx� 67 %,
Level three
= 100 %
The USB charging holder
9
has a red
standby LED
10
(see Fig� D) that indicates
when it is ready for use� The standby LED
10
is permanently on whenever the USB
charging holder
9
is connected to a
power source�
The cordless work lamp can also be
charged without the USB charging holder�
To do so, connect the USB charging cable
12
to the micro-USB port
6
(see Fig� B)
and a standard SELV USB interface�
Please note:
The product cannot be
switched on during charging process, so
continuous operation is not possible�
z
Switching the cordless work
lamp ON/OFF
Unfold the cordless work lamp�
The ON/OFF button
4
switches the
cordless work lamp on/off and also
controls its brightness� The battery charge
level is indicated by the charge status
