NOTES:
1.) Ensure the last fixture in every daisy chain is capped. Each leader cable is packaged with an end cap. Failure
to cap the fixture will result in water ingress.
2.) Do not hot-plug fixtures. Ensure that power to the power supply is off before connecting or disconnecting
fixtures.
3.) White connector = power input. Mate with white plug on leader cable/jumper cable.
4.) Longer jumper cables may be sleeved through PVC (1”), EMT or Wire Mold if desired.
1. Confirm All Components Received
A.) Supplied Materials
-WPX Series Luminaire(s)
-WPX 48V Power Supply(s)
-Leader Cable(s) with End Cap(s)
-Jumper Cable(s) if applicable
-Mounting Clips
-Liquid-tight Cable Glands
B.) Required Materials
-Mounting Screws (depending on mounting surface)
WPX
INSTALLATION MANUAL PAGE 1
STRONG. SIMPLE. COMPACT.
WARNING:
Fixtures must be installed by a qualified electrician in accordance with all national and local electrical and
construction codes and regulations. Please read through this document entirely before beginning the installation.
Rev Date 19 0815
www.ggled.net
T
800.285.6780
E
IP69K
IP68
CERTIFIED
Multiple Fixtures; Quick-Connect Cabling
Single Fixture
